Instruments in force 2026-09-26 - verified against USTR, CBP HTSUS & the Federal Register
US import duty stacks - base HTS + the Section 301 forced-labor duty (10% or 12.5% by origin; Section-232-covered goods pay Section 232 instead) + the Section 301 China lists + the processing fee can all hit the same entry. Enter your HTS code, country of origin and value to see every layer and your total effective rate.
Total effective rate
75.35%
Worked example - China steel coil at $50,000, entered 2026-09-26: $37,673.20 duty + MPF, 75.35% of declared value. Build your own below.
Live duty-stack checker
The content-value split only affects entries dated before — since the Section 232 restructuring of that date, duty is assessed on the full entered value.
Total duty plus MPF $37,673.20, effective rate 75.35%, landed cost $87,673.20.
Layer
Rate
Amount (USD)
Citation
Base HTS
0.00%
$0.00
HTSUS 2026 ch. 72 — hot-rolled iron / non-alloy steel flat products, free base rate (hts.usitc.gov, Rev. 22, base rate read 2026-11-09)
Section 122 (10% global surcharge)· not applicable
0.00%
$0.00
Section 232 exemption from Section 122
Section 301 forced labor (by country of origin)· exempt (Section 232 goods / claimed USMCA)
Proclamation 10947 (June 3 2025; steel + aluminum 50% effective 2025-06-04); UK 25% treatment requires applicable origin and melt/pour or smelt/cast conditions; since 2026-04-06 duty applies to full entered value under Proclamation 11021 (confirmed 2026-09-26), which also applies the 50% rate to most copper articles (50/25/15% tranche mapping not yet modeled — 50% steel/aluminum default shown)
Section 301 (China Lists 1-4)
25.00%
$12,500.00
USTR Section 301 China Lists 1-4 — 25% ad valorem for List 1-3 codes (List 3 at 25% since 2019-05-10; earlier 10% phase not modeled)
Section 338 (Canadian toys)· not applicable
0.00%
$0.00
Section 338: HTS Rev. 22 note 51, 9903.03.14; Canadian 9503.00.00 +50% from 2026-08-22, including USMCA; verified 2026-11-09
Auto Cap Adjustment· not applicable
Unconfirmed
$0.00
15% combined Column 1 + Section 232: EU from 2025-08-01 (90 FR 46136), Japan from 2025-09-16 (90 FR 44638), South Korea from 2025-11-01 (CBP CSMS 66987366); MPF excluded
Merchandise Processing Fee (MPF)
0.35%
$173.20
Merchandise Processing Fee FY2027 — 0.3464% ad valorem, min $34.58 / max $670.86 per formal entry (Federal Register 2026-15530); USMCA-originating goods exempt (19 CFR 24.23(c)(3))
Total duty + MPF
75.35%
$37,673.20
Effective rate (duty + MPF) over declared value
Landed cost
$87,673.20
Declared value + total duty + MPF
Last updated: · Instruments checked: · Data verified: against the live CBP HTSUS file (hts.usitc.gov) (rules dataset version 2026.11.09-rev22). Figures are a first-pass screen, not a customs broker classification. Verify against the live CBP HTSUS file before filing an entry.
How this checker works
Each layer is computed independently from the public instrument that created it: the base rate from the CBP HTSUS file for the selected subheading (preferential free rate under a USMCA claim); the Section 301 forced-labor duty (10% or 12.5% by country of origin, HTSUS 9903.05.20-9903.05.84, effective 2026-07-24 with no sunset, per USTR final action 2026-07-23 and CBP CSMS #69326983, carved out for Section-232-covered articles and claimed USMCA CA/MX goods); the Section 122 temporary surcharge for entries inside its closed 2026-02-24 to 2026-07-24 window; Section 232 from the steel / aluminium / autos proclamations (metal-content value honoured for entries before 2026-04-06, full entered value since the 2026-04-06 restructuring under Proclamation 11021, which also applies the 50% rate to most copper articles — whose 50/25/15% tranche mapping is not yet modelled here); Section 301 from the USTR China lists; the Japan/EU/Korea autos combined treatment (EU 2025-08-01; Japan 2025-09-16; Korea 2025-11-01); and the entry-date MPF (FY2026 $33.58-$651.50; FY2027 $34.58-$670.86; 0.3464%, USMCA-exempt). The IEEPA reciprocal, border and fentanyl layers were vacated by the Supreme Court on 2026-02-20 (Learning Resources v. Trump, 24-1287) and are not computed; pre-vacatur entry dates are not reconstructed. Two dates are tracked separately and never merged: the rate tables carry their own verification date and go amber after 30 days, while the set of instruments in force carries its own. Unconfirmed conditions suppress tariff amounts and the total. Supported layers are summed over your declared customs value as of the entry date you select, and every row cites the instrument that set its rate.
The stack, layer by layer
US import duty does not replace your base rate - it stacks on top of it. A single entry can owe the ordinary HTS (MFN) duty, then either the Section 301 forced-labor duty set by country of origin or, for steel, aluminium and autos, the Section 232 national-security tariffs (Section-232-covered goods are exempt from the forced-labor duty), then the Section 301 China lists, then the processing fee - each an independent instrument over the same declared value. The layers add up into one total effective rate.
1Base HTS (MFN)0–2.6%
+
2Section 301 forced labor10% or 12.5% by origin
+
3Section 232 metals / autosup to 50%
+
4Section 301 China listsup to 25%
+
5Processing fee (MPF)0.3464%
Section 23250% on the modelled primary steel line; the UK 25% treatment needs UK melt-and-pour evidence. Autos have origin-specific rules — national-security tariffs, assessed on the full entered value since 2026-04-06 (also covers most copper articles under Proclamation 11021).Proclamation 10947 · Proclamation 11021 · USITC HTSUS ch. 99
Section 30125% on the modelled China-origin steel, cable and vehicle subheadings; this is not a rate for every item on Lists 1–4. Set by country of origin, not country of shipment.USTR China Lists 1–4
Forced-labor duty10% or 12.5% additional ad valorem by country of origin, effective 24 July 2026 with no sunset. Replaced the Section 122 surcharge, which expired the same minute. Section-232-covered goods are carved out.USTR final action 2026-07-23 - CBP CSMS #69326983, HTSUS 9903.05.20-9903.05.84
Autos capJapan, EU and South Korean passenger vehicles: combined base + Section 232 treatment of 15% when the base rate is below 15%; effective dates differ by origin.Section 232 proclamation modifications
Processing feeMPF at 0.3464% of entered value, min $34.58 / max $670.86 per formal entry (FY2027). A fee, not a tariff — the autos cap does not absorb it.Federal Register 2026-15530
Section 232 rates and scopes change fast — proclamations, exclusions and tranche rules move month to month. Unconfirmed entry conditions suppress the affected tariff amounts and totals; treat the output as a first-pass screen and confirm each line against the live CBP HTSUS file (hts.usitc.gov) before you file.
US import duty stacks in independent layers over the same declared value: the base HTS rate, the Section 301 forced-labor duty (10% or 12.5% by country of origin, in force since 24 July 2026 with no sunset) or, for Section-232-covered goods, Section 232 instead (50% on the modelled primary steel line, subject to origin conditions; 25% on autos before country-specific treatment), then the Section 301 China lists (List 3 at 25%), then the FY2027 Merchandise Processing Fee - so a base-rate-only figure understates the duty owed (instruments in force 2026-10-17). Compute your own entry stack with the checker below.
Two changes, not one. The Supreme Court vacated the IEEPA reciprocal, border and fentanyl layers on 2026-02-20, and their statutory successor - the flat 10% Section 122 surcharge - expired on 2026-07-24 when its 150-day window closed without a congressional extension. The Section 301 forced-labor duty took over the same minute: 10% or 12.5% by country of origin, no sunset, carved out for Section-232-covered articles and for claimed USMCA-originating CA/MX goods. Entry dates inside the old window still compute the Section 122 layer.
US tariff stack at a glance - instruments in force 2026-10-17
Layer
Rate
Instrument
Section 301 forced-labor duty (by country of origin)
10% or 12.5% (per origin; no sunset)
USTR final action 2026-07-23, CBP CSMS #69326983, HTSUS 9903.05.20-9903.05.84; Section 232 goods and claimed USMCA CA/MX goods exempt
Section 232 — steel & aluminum
50% for the primary steel line; UK 25% eligibility unconfirmed without melt-and-pour evidence
Proclamation 10947, entries from 2025-06-04; full entered value since 2026-04-06 (Proclamation 11021, which also applies the 50% rate to most copper articles)
Section 232 — autos
25% standard auto duty; 15% combined treatment for JP/EU/KR
EU from 2025-08-01 (90 FR 46136); Japan from 2025-09-16 (90 FR 44638); Korea from 2025-11-01 (CBP CSMS 66987366)
Section 301 — modelled China lines
25%
USTR China lists (List 3 at 25% since 2019-05-10)
Merchandise Processing Fee (FY2027)
0.3464% (min $34.58 / max $670.86)
Federal Register 2026-15530; USMCA-originating exempt
Last updated: · Instruments checked: · Data verified: against the CBP HTSUS file (hts.usitc.gov)
This tool returns a layer-by-layer first-pass screen built from primary US tariff sources. It is not a customs broker classification and not legal advice. Since 24 July 2026 the across-the-board layer is the Section 301 forced-labor duty - 10% or 12.5% depending on the country of origin, with no sunset date - which replaced the Section 122 surcharge the minute that surcharge expired. Both are date-gated on your entry date, with Section 122 computed only inside its verified window; unresolved historical conditions suppress the tariff total. Verify each layer against the live CBP HTSUS file and the cited instrument before filing an entry.
What each layer is — and why they stack
A single US import entry can owe duty under several independent instruments at once. Each layer below has its own legal basis, its own scope, and its own exclusion rules — and unless an instrument says otherwise, the layers add on top of each other over the same declared customs value.
Base HTS duty
The ordinary Column 1 (MFN) rate for your subheading in the CBP HTSUS file. Many industrial goods are free; vehicles and consumer goods often are not.
Section 301 forced-labor duty — the across-the-board layer since 24 Jul 2026
An additional ad valorem duty of 10% or 12.5% depending on the country of origin, from USTR's final action of 23 July 2026 in 60 Section 301 investigations into economies that failed to impose and enforce a prohibition on importing goods made with forced labor. It took effect at 12:01 a.m. ET on 24 July 2026 and has no sunset date. CBP files it under HTSUS 9903.05.20–9903.05.84, with general exemptions at 9903.05.85–9903.05.92: goods already covered by a Section 232 measure (steel, aluminium, copper, vehicles and parts, semiconductors, timber), pharmaceuticals, civil aircraft, donations and informational materials are carved out, as are Canadian and Mexican goods that enter free of duty under the USMCA. Because the rate is per country, this checker reads it from a country table rather than applying one global figure — and an origin outside that table leaves the tariff total unconfirmed instead of guessing.
A flat 10% surcharge on most imports under Section 122 of the Trade Act of 1974 (Proclamation 11012, HTSUS 9903.03.01), effective 2026-02-24. Section 122 caps a balance-of-payments surcharge at 150 days without an act of Congress, none was passed, and it lapsed by operation of law on 2026-07-24. CBP no longer collects it. The layer stays in this checker because entries dated inside its window really did pay it: pick an entry date before 24 July 2026 and the row reappears. It never applied to Section-232-covered steel, aluminium or autos, and USMCA-originating goods of Canada or Mexico were exempt.
Section 232 — steel, aluminum, autos
National-security tariffs set by presidential proclamation. For entries before 2026-04-06, the duty on derivative articles applies to the steel or aluminum content value when you can document it — that is what the optional content-value field models. Since the 2026-04-06 restructuring, Section 232 duty is assessed on the full entered value.
Section 301 — China lists
Trade-remedy tariffs on China-origin goods under USTR Lists 1–4. Origin is what matters: a China-made product shipped via a third country usually stays in scope.
Merchandise Processing Fee (MPF)
CBP's ad valorem processing fee on formal entries — 0.3464% of entered value for FY2027, with a $34.58 minimum and $670.86 maximum per entry. A fee, not a tariff, so the autos cap does not absorb it. USMCA-originating goods are exempt.
IEEPA layers — vacated 2026-02-20
The IEEPA reciprocal (EO 14257), Mexico/Canada border, and China fentanyl tariffs were struck down by the Supreme Court in Learning Resources v. Trump (No. 24-1287, decided 2026-02-20) and are no longer collected; refunds are in progress. Their statutory successor, the Section 122 surcharge, is computed for entries in its 2026-02-24 to 2026-07-24 window and then hands over to the Section 301 forced-labor duty. The historical pre-vacatur IEEPA regime for older entry dates is not reconstructed by this checker and is pending a dataset update.
USMCA preference
A valid USMCA claim for Mexico or Canada enters originating goods at the preferential (free) rate instead of the Column 1 rate and exempts the entry from MPF — but the forced-labor exemption and other Section 232/301 conditions need separate checks, which is why the checker models it as a separate input.
The ledger above shows each layer as its own line item with the instrument that created it, then sums them into total duty, the effective rate over declared value, and a simple landed-cost figure. Rates and scopes change quickly — treat the output as a first-pass screen and confirm every line against the live CBP HTSUS file and the cited proclamation or executive order before filing an entry.
How three entries stack
The examples use the stated entry date and fiscal-year fee. Coordinator verification 2026-10-17 covers the four base rates and instrument set in HTS Revision 21. Missing entry conditions still block the total. Enter your own HTS code, origin, value and entry date to compute a supported entry stack.
China steel coil - the full stack
HTS 7208.10.15.00, origin CN, entered 2026-10-17: the free base HTS rate, then Section 232 steel at 50%, then Section 301 List 3 at 25%, then the FY2026 MPF of $173.20 - $37,673.20 in all, 75.35% of declared value, for a landed cost of $87,673.20. Steel is Section-232-covered, so the forced-labor duty does not apply to it. Compute your entry stack in the checker above.
German sedan — the 15% combined cap at work
HTS 8703.23.01, origin DE: base 2.5% plus Section 232 autos 25% would raw-stack, but the Japan/EU combined-rate cap holds total tariff to 15% of entered value. The cap absorbs tariffs, not the MPF, which is added on top. → compute your entry stack in the checker above.
China cable assemblies - conditional Section 232 treatment
HTS 8544.42.90 has a 2.6% base rate. The former 8544.42.90.00 code is not a current statistical reporting number. This subheading appears among metal articles in Proclamation 11021: the previous claim that it has no Section 232 duty is contradicted. The checker requires the metal share of article weight. At or above 15%, Section 232 is 25% of full value, reduced to 10% with confirmed 85% US-melted metal; the forced-labor duty is exempt. Below the weight threshold, no Section 232 is charged. An unknown weight blocks the total. Official metals annexes.
Edge cases the checker models
UK steel at 25% requires UK melt-and-pour evidence from 2026-04-06; without it the rate and total remain unconfirmed.
A valid USMCA claim (MX / CA) drops the base rate to free and exempts the entry from MPF — but other trade-remedy conditions still need separate checks.
The MPF min / max band bites at the extremes: a $5,000 entry pays the $34.58 minimum (0.3464% would be $17.32); a $500,000 entry is capped at $670.86 instead of $1,732.
For entries dated before 2026-04-06, Section 232 duty on derivative articles can be assessed on the documented steel / aluminum content value — the optional content-value field models exactly that window.
An origin outside the published forced-labor country table leaves the tariff total unconfirmed. Guessing a tier into a money line is the one thing this checker will not do.
US tariff stacking — frequently asked questions
Is the Section 232 tariff on steel and aluminum still 50% in 2026?
Proclamation 10947 (June 3, 2025) increased the rate from 25% to 50% from June 4, 2025. The modelled primary steel line uses 50%; the current rate for a derivative depends on its classification and the later annexes, so this is not a blanket rate for every metal product. The UK 25% rate is conditional on UK melt-and-pour or smelting/casting evidence under Proclamation 11021, not country of origin alone. Since the restructuring effective 2026-04-06 (Proclamation 11021, which also applies the 50% rate to most copper articles), the duty is assessed on the full entered value of the article — the earlier practice of declaring only the steel or aluminum content value no longer applies to new entries.
Do Section 232 and Section 301 tariffs stack on the same import?
Yes — they are independent instruments, and both apply over the same declared customs value unless a specific exclusion says otherwise. A China-origin hot-rolled steel coil under HTS 7208.10.15.00 pays the free base rate plus 50% Section 232 plus 25% Section 301, all on the entered value, before the Merchandise Processing Fee is added. That stacking, line by line with citations, is exactly what this checker models — run your own HTS code and value to see the total.
Do I still pay the Section 122 surcharge - the flat 10% global tariff?
No. It expired on 24 July 2026. Section 122 of the Trade Act of 1974 caps a balance-of-payments surcharge at 150 days without an act of Congress, no extension was passed, and the flat 10% lapsed by operation of law; CBP no longer collects it. But nothing got cheaper, because a replacement took effect the same minute: the Section 301 forced-labor duty, from USTR's final action of 23 July 2026 in 60 investigations into economies that failed to impose and enforce a prohibition on importing goods made with forced labor. It adds 10% or 12.5% depending on the country of origin - China, Hong Kong, Vietnam, Thailand, Brazil and Turkiye are in the 12.5% band; Canada, Mexico, India, Indonesia, Malaysia and the United Kingdom are in the 10% band; the EU and Taiwan are topped up to a 10% combined rate and Japan, South Korea and Switzerland to 12.5% - and it has no sunset date. CBP files it under HTSUS 9903.05.20-9903.05.84 (CSMS #69326983). Goods already covered by a Section 232 measure are carved out, as are Canadian and Mexican goods entering free of duty under the USMCA. This checker computes it for entry dates from 24 July 2026 and computes the old Section 122 surcharge for entries inside its closed window. The IEEPA reciprocal, border and fentanyl tariffs it all replaced were vacated by the Supreme Court on 2026-02-20 and the previously quoted roughly $175 billion refund amount is unconfirmed; consult the official CBP refund guidance.
Why is the forced-labor duty a different rate for each country?
Because that is how USTR wrote it. Section 122 was legally required to be flat - the statute demands broad and uniform application and forbids country-specific rates - so a single 10% figure was the whole layer. Section 301 is the opposite: each investigation reaches one economy, and the 23 July 2026 final action set 10% for 17 economies and 12.5% for 38 more, with a handful (the EU, Taiwan, Japan, South Korea, Switzerland) assessed net of the column-1 rate, meaning the combined rate is topped up to the target only when the ordinary rate is below it. A checker that averaged those into one global number would be wrong for almost every entry, so this one reads the rate from the published country table and, when an origin is not in that table, leaves the tariff total unconfirmed.
Does a USMCA claim remove Section 232 or Section 301 duty?
No. A valid USMCA preference claim for Mexico- or Canada-originating goods does two things: the base HTS duty drops to the preferential free rate, and the entry is exempt from the Merchandise Processing Fee under 19 CFR 24.23(c)(3). The Section 301 forced-labor layer has its own USMCA exemption; other Section 232 and Section 301 conditions need separate checks, which is why the checker models the claim as a separate input.
How is the Merchandise Processing Fee calculated for FY2027?
For formal entries, MPF is 0.3464% of entered value with a minimum of $34.58 and a maximum of $670.86 per entry (Federal Register 2026-15530). On a $5,000 entry, 0.3464% would be only $17.32, so the $34.58 minimum applies; on a $500,000 entry the raw $1,732 is capped at $670.86. MPF is a user fee, not a tariff — the Japan/EU autos combined-rate cap does not absorb it, and USMCA-originating goods are exempt. FY2026 uses $33.58–$651.50 through 30 September 2026 (Federal Register 2025-13869). FY2027 uses $34.58–$670.86 from 1 October 2026 (Federal Register 2026-15530). The checker selects the band by entry date; other fiscal years are unconfirmed.
Is Section 232 charged on the steel content value or the full entered value?
It depends on the entry date. For derivative-article entries before 2026-04-06, importers who could document the steel or aluminum content value paid Section 232 duty on that content value only — that is what the optional content-value field in this checker models. The Section 232 restructuring effective 2026-04-06, under Proclamation 11021, assesses the duty on the full entered value and also applies the 50% rate to most copper articles, so the split no longer applies to current entries. The restructuring’s 50/25/15% tranche mapping is not yet modeled here; the 50% steel / aluminum default is shown.
What is the 15% combined-rate cap for Japanese and EU cars?
For the modelled 2.5% base-rate passenger vehicles, the combined base plus Section 232 treatment is 15%: EU-27 from 2025-08-01 (90 FR 46136), Japan from 2025-09-16 (90 FR 44638), and South Korea from 2025-11-01 (CBP CSMS 66987366). The eight-digit subheading 8703.23.01 is used because 8703.23.01.00 is not a current statistical reporting number. A German sedan under HTS 8703.23.01 would raw-stack 2.5% base + 25% Section 232, but the cap holds total tariff to 15% of entered value. The cap survives the IEEPA vacatur because it was never an IEEPA measure, and it does not absorb the MPF — run your own vehicle value to see the capped duty.
Can I avoid Section 301 by routing China-made goods through Vietnam?
Generally no. Section 301 applies by country of origin — where the goods were last substantially transformed — not the country they ship from. Simple transshipment, repacking or minor processing in a third country does not change a China origin, and CBP actively pursues transshipment evasion with penalties under 19 USC 1592. A genuine shift of substantial transformation to another country can change origin, but that is a classification question to settle with a licensed broker — the tariff engineering tool linked below covers the lawful version of that exercise.
Answers reflect the instruments in force as re-read on 2026-10-17 and the rate tables verified 2026-10-17. Rates and scopes change quickly - confirm against the live CBP HTSUS file before filing.
Related ShipCost Lab tools
The tariff stack is one slice of the landed-cost picture. These tools cover the neighboring questions:
Duty & tax import calculator — estimate the full import bill — duty, VAT/GST and fees — by destination, origin and declared value, for the broader cross-border landed-cost picture beyond the US tariff stack.
Base rates and instrument coverage verified by the coordinator on 2026-10-17 against USITC HTS Revision 21 (release 2026-10-09). Entry-specific conditions still need confirmation.
Base HTS: steel 0%, toys 0%, cable 2.6%, passenger car 2.5%; statistical codes corrected. Consulted 2026-10-15: H72, H95, H85, H87.
Section 232 steel: 50% from 2025-06-04; full customs value from 2026-04-06; UK eligibility remains unconfirmed; cables use the weight and US-metal inputs. Consulted 2026-10-15: P25, P26, A, P32, P45, H99.
Autos: EU 2025-08-01, Japan 2025-09-16, Korea 2025-11-01; combined base + Section 232 treatment 15% for the modelled 2.5% base. Consulted 2026-10-15: E, J, K.
Section 301 China lists: modelled steel, cable and vehicle lines 25%; forced labor by origin and product exclusions. Consulted 2026-10-15: H99, FL, U.
Section 122: closed 2026-02-24 to 2026-07-24 window. Consulted 2026-10-15: S122.
CBP refund pages checked again on 2026-10-15: access denied (HTTP 403). Aggregate refunds remain unconfirmed.
Conditional duties verified
Cables under 8544.42.90: from , metal must reach 15% of article weight for Section 232 to apply. It charges 25% on the full value (9903.82.09), or 10% if at least 85% of the metal was melted in the US (9903.82.06). Below the weight threshold there is no Section 232; the forced-labor layer may apply instead. Unknown weight blocks the total.
China steel 7208.10.15 has Section 301 from (9903.91.01). Vehicles 8703.23.01 have List 1 Section 301 from ; unresolved vehicle conditions still block the total.
Canadian toys 9503.00.00 owe an additional 50% under Section 338 (9903.03.14) from , even with USMCA preference. Other modelled lines are outside that list.